AQ-150 is suitable for monitoring particulate emissions from cyclones, precipitators, baghouses, or any dust control device. It is also ideal for monitoring air quality in underground transportation systems, ventilation systems, indoor workplaces, or any other application where immediate data on smoke, dust, fumes, or mists is needed. AQ-150 warns you of problems before they become trouble.
AQ-150 utilizes an optical layout consisting of an infrared emitter and silicon detector. As particles enter the sensing area an analog output, current or voltage, provides a signal which is proportional to the particle concentration. The signal can be sent to a recorder or central processing panel.
AQ-150 easily mounts on walls, inside air ducts or at strategic locations in dust collectors, bag houses, or any dust control device. Units can be configured in a single or multipoint system.
Specification
| Detectable gases / parameters | PM2.5 and PM10 |
|---|
| Electronics / processor | Micro controller |
|---|
| Power supply | 230 V AC |
|---|
| Alarm | Adjustable LOW and HIGH |
|---|
| Output | Relays, 4 – 20 mA analog, RS 485, MODBUS |
|---|
| Technology | EC & IR for gases, LASER for PM |
|---|
| Resolution | 0.01 µg/m³ |
|---|
| Accuracy | ± 2 % |
|---|
| Operating temperature | 0 – 55 °C |
|---|
| Sampling | Direct plug-in |
|---|
| Housing | Sheet steel (Standard Enclosure : MS Power coated Aluminium) |
|---|
| Weight | 40 – 100 Kgs (Subject to configuration) |
|---|
The above Parameter and Ranges are only indicative. Endee will build up and supply the analyser with Parameters, range and features to any Practical Configuration.
Note : Specifications and Features will vary with application. The above are established and validated during design, but are not to be construed as test criteria for every product. Due to endee’s commitment to research, design and product improvement, specifications are subject to change without notice
Reviews
There are no reviews yet.