UV-IR Flame Detectors

Flame Detector {UV-IR-UV-IR 740}PNGFlame Detector {UV-IR-UV-IR 740}PNG

UV-IR Flame Detectors

ELECTRIC SPARK DETECTOR / FIRE CONTROLLER

UV-IR Flame Detector is a combination of a UV andIR flame detector which utilizes a microprocessor for sophisticated electronic signal analysis. When a UV optical sensor is integrated with an IR sensor, a dual band detector is created that is sensitive to the UV and IR radiation emitted by a flame. The combined UV-IR flame detector offers increased immunity over the UV detector, operates at moderate speeds of response, and is suited for both indoor and outdoor use.

  • Highly Sensitive – detects cigarette lighter flame from 5 meters.
  • Flame detection exceeding 50 meters.
  • Scans an area instead of spot detection.
  • Fast Response Time.
  • Solar and artificial light blindness.
  • Rugged electronic, module.
  • Weather Proof / Explosion proof housing.
  • Design for used in hazarduous /non hazarduous locations.
  • Low power consumption 12/24 VOC or 220 VAC Operation
Category:

Specification

TechnologyUV-IR Technology
Response Time< 3 seconds
Cone of vision120° minimum
Optical Self-TestAutomatic continuous optical path
Alarm ResetAutomatic or manual when flame is no longer detected
CommunicationAvailable with optional MODBUS (RS-485) facility / HART
Operating Temperature40°F to 185°F (-40°C to 85°C)
Dimensions125 X 125 X 71 mm
ComplianceEN 54-10

The above Parameter and Ranges are only indicative. Endee will build up and supply the analyser with Parameters, range and features to any Practical Configuration.

Note : Specifications and Features will vary with application. The above are established and validated during design, but are not to be construed as test criteria for every product. Due to endee’s commitment to research, design and product improvement, specifications are subject to change without notice

Detection

Approximate Detection Distance For Burning Materials

Cigarette Lighter1 inch flame from 5mtr
Alcohol30mtrs(lxlft.Panfire)
Gasoline50mtrs(lxlft.Panfire)
Jet Fuel50mtrs(lxlft.Panfire)
Butane05 mtrs. (lxl inch flame)
Hydrogen Fuel75 mtrs (6×6 inch Pan fire)
02 Ranges0-5 Vol% to 0-25 Vol%
Electric Spark50mtr5.(15VACorDC)

The above Parameter and Ranges are only indicative. Endee will build up and supply the analyser with Parameters, range and features to any Practical Configuration.

Note : Specifications and Features will vary with application. The above are established and validated during design, but are not to be construed as test criteria for every product. Due to endee’s commitment to research, design and product improvement, specifications are subject to change without notice

Reviews

There are no reviews yet.

Be the first to review “UV-IR Flame Detectors”
Scroll to Top