Trace Moisture Analyzer TM2000


Trace Moisture Analyzer TM2000

Designed to make the task of trace oxygen analysis easier, faster and more precise than ever before

  • Insta recovery advanced micro fuel cell sensor
  • Display gas concentration, units
  • Extensive self-diagnostic testing at start-up and on demand with continuous powersupply monitoring
  • Auto ranging capabilities
  • One high and one low alarm set point with corresponding relay contacts
  • Sensor failure alarm
  • Extended-life, maintenance-free year warranty and an expected life of two years
  • 16×2-line alphanumeric display screen, continuously prompting and informing the operator
  • High resolution, accurate readings of oxygen content from low ppm levels through 25%.

Custom Engineering is Endee’s main strength Endee maintains in-house capability to both design and manufacture a wide variety of sample systems tailored to meet out customers’ process requirements. We design sample-conditioning systems for our complete line of process analyzers .

The trace oxygen analyser can be ordered as a standard unit or as part of a larger cost effective integerated analytical system. The analyser can also be supplied designed as a “split architecture” instrument, meaning that a general purpose, panel mounted Control Unit for non-hazardous areas controls a remote Analysis Unit(Transmitter) that can operate in hazardous areas.


Indication16×2 Alpha numeric Digital LCD Continuous
Principle of AnalysisFast Recovery Self Powered Diffusion Limited sealed Electrochemical Sensor
Ranges0 – 10, 0 – 100, 0 – 1000 ppm
Accuracy±2% of full scale (±1ppm for 0 – 10ppm range) at a constant temperature
DiagnosticsComprehensive self testing function
Digital InterfaceRS-232C
Response Time90% in 5 to 10 seconds 90% in 60 seconds (0 – 10 ppm range)
Reproducibility±1% at a constant temperature
Sensitivity0.5% of FS
Alarm SettingHi & Very High Adjustable over full range
Wetted Parts316 Stainless Steel / Teflon
Relative Humidity0 – 99% RH Non-condensing
HousingDrawn Aluminium
Recommended Sample0.1 to 5 Litre / Min
0 Operating Temperature0 to 50 C
Power110 or 220 V (user specified), 50/60 Hz
Analog Output4 – 20 mA isolated output 600 ohms
Sample inlet / outlet1/4” OD Flare fittings
Mounting Dimension390 x 132 x 230 mm


There are no reviews yet.

Be the first to review “Trace Moisture Analyzer TM2000”
Scroll to Top