• Modular Construction
  • Single Multipoint Monitoring
  • Toxic, Explosive Gas, Vapour, Smoke
  • Three Level Concentration And Fault Alarm
  • Power on LED
  • Visual and Audible Alarm Facility
  • Remote Alarm Capability
  • Reliable Solid State Circuitry
  • Maintenance Free Fail Safe Operation
  • Long Life Solid State / Catalytic Sensor
  • Test Points for Alarm Settings
  • Optional Analog or Digital Meter

Relay contacts could be typically used to actuate remote alarms, increase ventilation, shut off gas supply, or shut down a process. Should it not be feasible to install the sensor at the desired location because of maintenance, or operational consideration, a suction based sampling system can be employed. The Sensors Detectors are of very sturdy construction, with weather proof or ex-proof housings and are designed to serve for several years under normal Operating Conditions.


Target GasesVOC & other gases with Ionization Potential < 10.6eV
CaseHigh Impact PC/ABS
Dimensions170 X 100 X 130 mm approximately
DetectorPlug-in PID (Photo Ionization Detector)
Ionization Lamp Energy10.6 eV Standard
Measuring Rangesi) 0-20 PPM ii) 0 – 2000 PPM
ResolutionMinimum Detectable Quantity

i) 0.1 PPM (Isobutylene) for Range 1 ii) 0.1 PPM for Range 2
Power SourceRechargeable Batteries
Sample Flow Rate0.5 LPM
Temperature Range14째F to 104째F (0째C to 50째C) typical
Humidity Range0 to 90% RH (Non-Condensing)
Response Time< 20 seconds
SamplingDiffusion (D),Suction (S)

The above Parameter and Ranges are only indicative. Endee will build up and supply the analyser with Parameters, range and features to any Practical Configuration.

Note : Specifications and Features will vary with application. The above are established and validated during design, but are not to be construed as test criteria for every product. Due to endee’s commitment to research, design and product improvement, specifications are subject to change without notice


There are no reviews yet.

Be the first to review “FLP-GDS-1565”
Scroll to Top