WP GAS Transmitters Weather Proof

WP GAS Transmitters Weather ProofWP GAS Transmitters Weather Proof

WP GAS Transmitters Weather Proof

  • Indicating or Non Indicating
  • Discrete Analog 4- 20mA
  • Compatible with PLC, Scada and DCS
  • Power Supply 24VDC
  • Gas Specific, Long life Sensor

Relay contacts could be typically used to actuate remote alarms, increase ventilation, shut off gas supply, or shut down a process. Should it not be feasible to install the sensor at the desired location because of maintenance, or operational consideration, a suction based sampling system can be employed. The Sensors Detectors are of very sturdy construction, with weather proof or ex-proof housings and are designed to serve for several years under normal Operating Conditions.


Detection PrincipleApplication Based Electrochemical , Semiconductor or PID
Response Time<5seconds
Zero drift0.2% Fs
Operating Voltage22-30 Volt DC
Operating Temperature0-50 C
TerminationsPCB mounted terminal blocks toaccept 1.5mm wires
Displaylnbuilt 0.5n LCD
Output4- 20 mA Linear/0 – lVolts DC (V)/RS232/RS485 2 wire (Electrochernical sensor based, Dew point, Humidity, Temp, Moisture, Vapour Pressure) 3 Wire (Cumbustible, Toxic Gas)
Power Consumption2 wire: 0.5 W max./ 3 wire: 3.6 W max.
Max. Load600Ohms
Mounting2″ Pipe (U clamps will be provided)

The above Parameter and Ranges are only indicative. Endee will build up and supply the analyser with Parameters, range and features to any Practical Configuration.

Note : Specifications and Features will vary with application. The above are established and validated during design, but are not to be construed as test criteria for every product. Due to endee’s commitment to research, design and product improvement, specifications are subject to change without notice


There are no reviews yet.

Be the first to review “WP GAS Transmitters Weather Proof”
Scroll to Top