The Model CA 2000 Series Multi Gas Analyser Is Suitable For The Continuous Measurement Of The Concentrations Of Gases Such As CO, C02, S02, NO, 02, CH4, H2. Maximum Four Of These Components Can Be Measured In The Analyser.
The Simplicity Of Operation Makes Endee Gas Analyser A Valuable Aid For Continuous Use In Various Applications changing the Measuring Parameters.
It’s Versatile Modular Design Permits Configuration and Up-Gradation to Suit Specific Needs of Customer in Selection of Gases to Be Measured.
Optionally Lndee Ca 2000 Is Available With 1 lighly Up-Gradable Microprocessor Based Llectronics Which Is Lquipped Willi Ballery Backup For Ram To Retain The Existing SeL Modes In Case Of Power Failure. Any Unacceptable Deviation From The Standard Stored Values Is Displayed As An Indication “Fault”.
Specification
| Measuring Gas & Range |
Click Here |
| Sensor & sampling |
Gas Ranges & Application dependent. |
| Display |
Digital Standard LED optional alphanumeric display |
| Power Supply |
100-290VAC/47-63HZ |
| Ambient Temp |
0-50째C |
| Enclosure |
High Impact Plastic |
| Mounting |
FieldMounted |
| Optional |
Flushon Panel/Table top |
| Warm uptime |
Analysis Detector Dependent |
| Output(Optional) |
4-20mA |
| Alarms |
Two Level (selectable range) |
| Sample Gas condition |
Temp:0-50째C, Pressure: Lessthan 1.5Kg/cm, The gas should be dry& clean.
Other than this suitable sample, Conditioning system is required |
| Calibration |
Manual, On command in microprocessor based system. |
The above Parameter and Ranges are only indicative. Endee will build up and supply the analyser with Parameters, range and features to any Practical Configuration.
Note : Specifications and Features will vary with application. The above are established and validated during design, but are not to be construed as test criteria for every product. Due to endee’s commitment to research, design and product improvement, specifications are subject to change without notice
Reviews
There are no reviews yet.