Copyright © 2010 Endee Engineers Pvt. Ltc. All Right Reserved
Download pDF
Products/ Portable-Gas-Analyzers
Special Features
Model PA 960
of concentrations - ensures maximum accuracy & reliability.
Sensor Technologies
Analyser is built up using sensors technology to suit specific application.
Batteries
Long life rechargeable batteries.
Diffusion or Suction with
Time tested, sturdy, high suction in-built pump supervisory circuit continuously monitors the pump
against failure.
Disposable Cartridge Line Filter & Moisture Separator
Low porosity, disposable cartridge line filter & moisture separator suitably conditions the sample.
Calibration
A built-in procedure allows easy and automatic span sensor calibration using stand; 3rd gas cylinder.
Periodic zero calibration is automatic on demand.
Electronic Flow Meter
An automatic built-in system measures a flow of sampling gas to obtain a constant sampling volume.
Multi Fuel Selection
The fuel efficiency analyser can be programmed for selection upto 10 fuels for calculating combustion
values.
Gas Probes & Sampling System
Flue gas sampling probes with different lengths, shapes i and max, operating temperatures Upto 1600°C
are available to match various requirements of different applications. A sintered pre-filter is suggested
for severe and having dust loded applications.
Heated Sampling Hose
A heated sampling Hose is available for high temperature applications. A heated hose allows flue gas
sampling without condensation.
Continuous Monitoring
The industrial design and the advanced technology applied to the unit, allows it to perform long term
gas analysis
PROBES - APPLICATION SPECIFIC AVAILABLE
Ambient CO Probe
An optional probe to monitor ambient CO concentration to keep the operator in a safe environment.
Gas Sniffer Probe
To detect and locate the precise position of a gas leak in a pipe network or equipment.
Smoke Index
Smoke Index measurement can be obtained using a specia 1 heated probe, supplied on request, and
through a dedicated internal procedure that computes the required volume of gas sample flowing into
the specific filter. The results can be obtained by comparison with the Smoke Index Table.
Gas Velocity
An internal procedure allows gas velocity measurements using the differential pressure inlet combined
with a pitot tube.
Report of Calibration
Each instrument is factory calibrated and certified against Endee's Standard Gasses and shipped with a
Report of Calibration stating the nominal and actual values and the deviation error.
Quality System
Research, development, production, inspection and certification activities are defined by methods and
procedures of the Endee's System inspected for compliance and certified ISO 9001.
Specifications
High quality Alpha Numeric LCD.
Automatic Zero On Start with fresh air sample.
automatic with calibration gas.
Vlaximum 20 seconds at 95% variation
Internal battery pack with external charger
220V/50 Hz
-5Deg.Cto 55Deg.C
-20Deg.C to45Deg.C
Aluminum
170X100X130 mm
1.5 Kg
(i) 8mm, Dia SS 600 mm length with 2 meter Hose
Probes of other material & length available.
(ii) Sniffer Probe : To detect & locate the precise position
of Gas leak in a pipe network.
Leather case with shoulder strap, battery charger,
operational manual.