Products / Fixed Gas Monitors
Special Features
PPM or LEL Range Calibration.
Modular Construction.
Single / Multipoint Monitoring.
Three Level Visual Alarm LED & Fault Alarm.
Maintenance Free Operation.
Long life Solid State / Catalytic Sensor.
Test Points for Alarm Settings.
Optional Analog or Digital Meter.
Weather Proof or EX – Proof Detectors.
AC or DC Power Operation.
Relay contacts could be typically used to actuate remote alarms, increase ventilation, shut off gas supply, or shut down a process. Should it not be feasible to install the sensor at the desired location because of maintenance, or
operational consideration, a suction
Model 1565
based sampling system can be employed. The Sensors Detectors are of very
sturdy construction, with weather proof or ex-proof housings and are designed to serve for several years under
normal Operating Conditions.
Specifications
Target Gases
VOC & other gases with Ionization Potential < 10.6eV
Dimensions
170 X 100 X 130 mm approximately
Detector
Plug-in PID (Photo Ionization Detector)
Ionization Lamp Energy
10.6 eV Standard
Measuring Ranges
i) 0-20 PPM ii) 0 - 2000 PPM
Resolution
Minimum Detectable Quantity
i) 0.1 PPM (Isobutylene) for Range 1 ii) 0.1 PPM for Range 2
Power Source
Rechargeable Batteries
Temperature Range
14°F to 104°F (0°C to 50°C) typical
Humidity Range
0 to 90% RH (Non-Condensing)
Response Time
< 20 seconds