Enquiry
Fixed Gas Analysers
Products/ Fixed Gas Analysers
MOdel 84
Special Features
  • Custom designed sample conditioning system
  • Application specific principle of Analysis
  • Infrared & Electrochemical detector for CO and
  • C02 & NOx, HC.
  • Electrochemical/paramagnetic or zirconia detector for 0,
  • Pellister or Thermal Conductivity detector for
  • Hydrocarbons & Hydrogen
  • EPA preferred dry basis measurement
  • Heated stack mounted filter optional
  • Automatic calibration
  • Built in printer. (Optional)
  • Multipoint sampling system. (Optional)
  • RS-232/485 output for data. logging and further analysis.(Optional)
  • Model 84
    Model CA 4000
    Specifications
  • Measuring Gas & Range:
  • Refer PDF Document
  • Sensor & sampling
  • Gas Ranges & Application dependent.
  • Display
  • Digital Standard LED optional alphanumeric display
  • Power Supply
  • 100-290VAC/47-63HZ
  • Ambient Temp
  • 0-50°C
  • Enclosure
  • Aluminium casing (power coated) for indoor application
  • Mounting
  • Standard : 19" Rack mounted
  • Optional
  • Flushon Panel/Table top
  • Warm uptime
  • Analysis Detector dependent
  • Output(Optional)
  • 4-20mA
  • Alarms
  • Two Level (selectable range)
  • Sample Gas condition
  • Temp:0-50°C, Pressure: Lessthan 1.5Kg/cm, The gas should be dry& clean. Other than this suitable sample, Conditioning system is required.
  • Calibration
  • Manual, On command in microprocessor based system.
    The above Parameter and Ranges are only indicative. Endee will build up and supply the analyser with Parameters, range and features to any Practical Configuration.

    Note : Specifications and Features wil 1 vary with application. The above are established and validated during design, but are not to be construed as test criteria for every product. Due to endee's commitment to research, design and product improvement, specifications are subject to change without notice