Field Mounted Gas Analayzer Weather Proof

Filed-mounted-gas-analyzer-461   download


  • Alarms for Low & High and Specific Fault
  • Specific Sensor as Per the Measuring Gas, Range & Application
  • Sample Conditioning System Offered As Per Application
  • Complete Automatic Operation
  • 16 Charachters 2 line LCD Display messages
  • A Mere Six Key to Operate the Complete Instrument

The Model CA 2000 Series Multi Gas Analyser Is Suitable For The Continuous Measurement Of The Concentrations Of Gases Such As CO, C02, S02, NO, 02, CH4, H2. Maximum Four Of These Components Can Be Measured In The Analyser.

The Simplicity Of Operation Makes Endee Gas Analyser A Valuable Aid For Continuous Use In Various Applications changing the Measuring Parameters.

It's Versatile Modular Design Permits Configuration and Up-Gradation to Suit Specific Needs of Customer in Selection of Gases to Be Measured.

Optionally Lndee Ca 2000 Is Available With 1 lighly Up-Gradable Microprocessor Based Llectronics Which Is Lquipped Willi Ballery Backup For Ram To Retain The Existing SeL Modes In Case Of Power Failure. Any Unacceptable Deviation From The Standard Stored Values Is Displayed As An Indication "Fault".

Measuring Gas & Range Click Here
Sensor & sampling Gas Ranges & Application dependent.
Display Digital Standard LED optional alphanumeric display
Power Supply 100-290VAC/47-63HZ
Ambient Temp 0-50°C
Enclosure High Impact Plastic
Mounting FieldMounted
Optional Flushon Panel/Table top
Warm uptime Analysis Detector-dependent
Output(Optional) 4-20mA
Alarms Two Level (selectable range)
Sample Gas condition Temp:0-50°C, Pressure: Lessthan 1.5Kg/cm, The gas should be dry& clean.
Other than this suitable sample, Conditioning system is required
Calibration Manual, On command in microprocessor based system.

The above Parameter and Ranges are only indicative. Endee will build up and supply the analyser with Parameters, range and features to any Practical Configuration.

Note : Specifications and Features will vary with application. The above are established and validated during design, but are not to be construed as test criteria for every product. Due to endee's commitment to research, design and product improvement, specifications are subject to change without notice

Add a review