Fixed Gas Scanners

Fixed Gas Scanners SC-5101   download


  • Single and up to 16 Input Models
  • Single or Multi Gas configuration
  • Self Integrity Check
  • Simultaneous display of Channel No.
  • Concentration & Unit of measurement
  • Low & High Alarm Indication for each channel
  • Common Kelay output for Alarm & halt
  • DC output to Power Transmitters
  • Selectable 0.1/1" Resolution
  • 16 X 1 Alpha numeric display
  • Models with Data logger & RS - 232/485
  • Communications
  • View all Channel Data & Alarn Status
  • Log Real-Time Data
  • Create txportable Uata hies

Indicators sets a new standard for performance, features. The SC-5101 Series of single and up to 16 channel digital indicators sets a new standard for performance, features, value and reliability. With built-in functionality, easy digital programmability, communications and powerful Windows-based software, this economical Scanner is ideal for monitoring, recording and logging applications. Complete configuration of the instrument can be quickly performed from the front panel.

It features easy-to-use front panel configuration, display of gas monitored, unit with Resolution of either 0.1 or 1 and alarm limit conditions.

Thanks to its exclusive software, you can export the data you gather as text to create graphs and produce hard copy reports.

The Model 8420 X includes an integral and modular power supply, three digit indicator serves as both a power on indicator and a direct reading display of the gas concentration. Alarm set points are software adjustable in 1 PPM / % increments across the range of detection. The reset switch reseta all alarm relays.

Display 1 X 16 Alphanumeric
Input 4-20 mA - Corresponding to measured Parameter.
Multiple Input Option Up to 16 inputs
Output to Power Transmitters 24 VDC
Relay Output 2Nos, 5A@ 120VACSPDT
Accuracy 0.5% ±1 Count
Stability with Time 0.8° per year
Point Update Rate 2 per second nominal (1° readings) 1 per second nominal (0.1° readings)
Process Input Impedance 100 Ohm |
Alarm Relay Contact 5 A @ 120 Vac SPDT (non-inductive load) Form-C
Power 220 Vac 50 Hz
Operating Temperature 0to55°C
Storage -40 to 65°C
Humidity <95% RH non-condensing
Serial Communications RS-232 o r485 Full duplex voltage, isolated from ground to 500 V AC 2400 Baud, 8 bits, 1 stop bit, no parity, ASCII.
Panel Mount (version) 19 inch Rack
Field Mount Version Ip65 <250 X 216mm upto 4 channels, 290 X 260mm 50 to 16 channels

The above Parameter and Ranges are only indicative. Endee will build up and supply the analyser with Parameters, range and features to any Practical Configuration.

Note : Specifications and Features will vary with application. The above are established and validated during design, but are not to be construed as test criteria for every product. Due to endee's commitment to research, design and product improvement, specifications are subject to change without notice

Add a review